Why Do You Need to Caulk Before You Repaint in Melbourne?

Painting the exterior of your house once in a while can help you keep it looking great. It will give your walls a new look and a fresh coat of color. This will not only protect your walls from any weather but also enhance the beauty of your home. Before you begin to paint your walls, you need to know that caulking is required before you apply any paint. It seals any cracks, holes, or gaps. 

It acts as a sealant to close any gaps. It will cause cracking or bubbles if there is moisture in the walls. Water can also seep into the house and cause fungus. Elastomeric caulk can be used to eliminate cracks and holes in walls. This will save you money and time spent painting walls. You can also hire professional caulking contractors in Melbourne via https://www.nkacaulking.com.au/.

Image Source: Google

It protects the walls and improves their adherence. The standard silicone caulking in Melbourne and polyurethane are also good choices. You should verify the quality rating and warranty rating of the caulk. It should be able to last at least 25 years. Remember to remove any old caulk prior to applying the new. You can also seek out professional caulking services in Melbourne. 

You can simply insert the tube in the caulk gun, and then cut 1/4 of the tip at an angle. However, too much may cause confusion. You should look for a mixture of two materials or components around exterior faucets or dryer vents. Before caulking, you should let the area dry.  You can use round beads. To create a smooth line, rub your finger on the beads. 


2 Most Common Causes Of Basement Moisture And How Can You Fix Them

#1. An Interior Water Leak

This may seem like a no-brainer, but you should always check for inside leaks first when trying to identify the cause of moisture in your basement. 

A water leak can come from numerous places: a shower, a sink, a toilet, a washing machine, a dishwasher, a bad pipe, just to name a few. You can even hire an expert for caulking and sealing services via https://mcgillbrothers.com/.

Sometimes, if the moisture in your basement is located on the ceiling or walls beneath a bathroom or kitchen, an interior water leak is to blame. Find where the moisture is located and determine if something in that area is leaking.

How to Fix It: An interior leak is typically one of the easiest problems to solve. Simply repair the leak (or have a plumber take care of it for you) and with any luck, that was the cause of the moisture, and it will be gone for good.

#2. Ineffective Grading

Rain or groundwater often makes its way into basements due to poor grading. The ground around your foundation should slope away from the house, not towards it. If draining in the wrong direction, water will accumulate against your foundation and eventually make its way inside. 

This often happens when fill dirt around your foundation isn’t properly compacted. As the dirt settles, the slope changes and water flows toward your house rather than away from it.

How to Fix It: Build up the dirt around your foundation, creating a slope aiming away from the house. This should be a minimum of one inch per foot, for at least 6 feet.